= The Trac Configuration File = [[TracGuideToc]] Trac configuration is done by editing the '''`trac.ini`''' config file, located in `/conf/trac.ini`. Changes to the configuration are usually reflected immediately, though changes to the `[components]` or `[logging]` sections will require restarting the web server. You may also need to restart the web server after creating a global configuration file when none was previously present. == Global Configuration == In previous versions, the global configuration was by default located in `$prefix/share/trac/conf/trac.ini` or sometimes /etc/trac/trac.ini depending on the distribution. If you're upgrading, you may want to specify that file to inherit from. Global options will be merged with the environment-specific options, where local options override global options. The options file is specified as follows: {{{ [inherit] file = /usr/share/trac/conf/trac.ini }}} == Reference == This is a brief reference of available configuration options. {{{ #!comment 1. Keep using [[TracIni]] in shipped default pages - hard-coded HTML output is for t.e.o only 2. Please *don't* edit the HTML output below. It will be very hard to notice changes there. Instead, add your suggested change in the Discussion section at the bottom of the page. Thanks! }}} {{{ #!html

[attachment]

max_sizeMaximum allowed file size for ticket and wiki attachments.
render_unsafe_contentWhether attachments should be rendered in the browser, or only made downloadable. Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to attach a file containing cross-site scripting attacks. For public sites where anonymous users can create attachments it is recommended to leave this option disabled (which is the default).

[browser]

color_scaleEnable colorization of the age column. This uses the same color scale as the source code annotation: blue is older, red is newer. (since 0.11)
downloadable_pathsList of repository paths that can be downloaded. Leave the option empty if you want to disable all downloads, otherwise set it to a comma-separated list of authorized paths (those paths are glob patterns, i.e. "*" can be used as a wild card) (since 0.10)
hide_propertiesComma-separated list of version control properties to hide from the repository browser. (since 0.9)
intermediate_color(r,g,b) color triple to use for the color corresponding to the intermediate color, if two linear interpolations are used for the color scale (see intermediate_point). If not set, the intermediate color between oldest_color and newest_color will be used. (since 0.11)
intermediate_pointIf set to a value between 0 and 1 (exclusive), this will be the point chosen to set the intermediate_color for interpolating the color value. (since 0.11)
newest_color(r,g,b) color triple to use for the color corresponding to the newest color, for the color scale used in blame or the browser age column if color_scale is enabled. (since 0.11)
oldest_color(r,g,b) color triple to use for the color corresponding to the oldest color, for the color scale used in blame or the browser age column if color_scale is enabled. (since 0.11)
oneliner_propertiesComma-separated list of version control properties to render as oneliner wiki content in the repository browser. (since 0.11)
render_unsafe_contentWhether attachments should be rendered in the browser, or only made downloadable. Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to attach a file containing cross-site scripting attacks. For public sites where anonymous users can create attachments it is recommended to leave this option disabled (which is the default).
wiki_propertiesComma-separated list of version control properties to render as wiki content in the repository browser. (since 0.11)

[changeset]

max_diff_bytesMaximum total size in bytes of the modified files (their old size plus their new size) for which the changeset view will attempt to show the diffs inlined (since 0.10).
max_diff_filesMaximum number of modified files for which the changeset view will attempt to show the diffs inlined (since 0.10).
wiki_format_messagesWhether wiki formatting should be applied to changeset messages. If this option is disabled, changeset messages will be rendered as pre-formatted text.

[header_logo]

altAlternative text for the header logo.
heightHeight of the header logo image in pixels.
linkURL to link to from header logo.
srcURL of the image to use as header logo.
widthWidth of the header logo image in pixels.

[inherit]

plugins_dirPath of the directory containing additional plugins. Plugins in that directory are loaded in addition to those in the directory of the environment plugins, with this one taking precedence. (since 0.11)
templates_dirPath to the shared templates directory. Templates in that directory are loaded in addition to those in the directory of environment templates, with this one taking precedence. (since 0.11)

[logging]

log_fileIf log_type is file, this should be a path to the log-file.
log_formatCustom logging format. If nothing is set, the following will be used: Trac[$(module)s] $(levelname)s: $(message)s In addition to regular key names supported by the Python logger library library (see http://docs.python.org/lib/node422.html), one could use: - $(path)s the path for the current environment - $(basename)s the last path component of the current environment - $(project)s the project name Note the usage of $(...)s instead of %(...)s as the latter form would be interpreted by the ConfigParser? itself. Example: ($(thread)d) Trac[$(basename)s:$(module)s] $(levelname)s: $(message)s (since 0.11)
log_levelLevel of verbosity in log. Should be one of (CRITICAL, ERROR, WARN, INFO, DEBUG).
log_typeLogging facility to use. Should be one of (none, file, stderr, syslog, winlog).

[milestone]

stats_providerName of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the milestone views.

[mimeviewer]

enscript_modesList of additional MIME types known by Enscript. For each, a tuple mimetype:mode:quality has to be specified, where mimetype is the MIME type, mode is the corresponding Enscript mode to be used for the conversion and quality is the quality ratio associated to this conversion. That can also be used to override the default quality ratio used by the Enscript render, which is 2 (since 0.10).
enscript_pathPath to the Enscript executable.
max_preview_sizeMaximum file size for HTML preview. (since 0.9).
mime_mapList of additional MIME types and keyword mappings. Mappings are comma-separated, and for each MIME type, there's a colon (":") separated list of associated keywords or file extensions. (since 0.10).
php_pathPath to the PHP executable (since 0.9).
pygments_default_styleThe default style to use for Pygments syntax highlighting.
pygments_modesList of additional MIME types known by Pygments. For each, a tuple mimetype:mode:quality has to be specified, where mimetype is the MIME type, mode is the corresponding Pygments mode to be used for the conversion and quality is the quality ratio associated to this conversion. That can also be used to override the default quality ratio used by the Pygments render.
tab_widthDisplayed tab width in file preview (since 0.9).

[notification]

admit_domainsComma-separated list of domains that should be considered as valid for email addresses (such as localdomain)
always_notify_ownerAlways send notifications to the ticket owner (since 0.9).
always_notify_reporterAlways send notifications to any address in the reporter field.
always_notify_updaterAlways send notifications to the person who causes the ticket property change.
ignore_domainsComma-separated list of domains that should not be considered part of email addresses (for usernames with Kerberos domains)
mime_encodingSpecifies the MIME encoding scheme for emails. Valid options are 'base64' for Base64 encoding, 'qp' for Quoted-Printable, and 'none' for no encoding. Note that the no encoding means that non-ASCII characters in text are going to cause problems with notifications (since 0.10).
smtp_always_bccEmail address(es) to always send notifications to, addresses do not appear publicly (Bcc:). (since 0.10).
smtp_always_ccEmail address(es) to always send notifications to, addresses can be see by all recipients (Cc:).
smtp_default_domainDefault host/domain to append to address that do not specify one
smtp_enabledEnable SMTP (email) notification.
smtp_fromSender address to use in notification emails.
smtp_from_nameSender name to use in notification emails.
smtp_passwordPassword for SMTP server. (since 0.9).
smtp_portSMTP server port to use for email notification.
smtp_replytoReply-To address to use in notification emails.
smtp_serverSMTP server hostname to use for email notifications.
smtp_subject_prefixText to prepend to subject line of notification emails. If the setting is not defined, then the [$project_name] prefix. If no prefix is desired, then specifying an empty option will disable it.(since 0.10.1).
smtp_userUsername for SMTP server. (since 0.9).
ticket_subject_templateA Genshi text template snippet used to get the notification subject. (since 0.11)
use_public_ccRecipients can see email addresses of other CC'ed recipients. If this option is disabled (the default), recipients are put on BCC (since 0.10).
use_short_addrPermit email address without a host/domain (i.e. username only) The SMTP server should accept those addresses, and either append a FQDN or use local delivery (since 0.10).
use_tlsUse SSL/TLS to send notifications (since 0.10).

[project]

adminE-Mail address of the project's administrator.
descrShort description of the project.
footerPage footer text (right-aligned).
iconURL of the icon of the project.
nameName of the project.
urlURL of the main project web site, usually the website in which the base_url resides.

[query]

default_anonymous_queryThe default query for anonymous users.
default_queryThe default query for authenticated users.

[revisionlog]

default_log_limitDefault value for the limit argument in the TracRevisionLog (since 0.11).

[roadmap]

stats_providerName of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the roadmap views.

[search]

min_query_lengthMinimum length of query string allowed when performing a search.

[svn]

branchesList of paths categorized as branches. If a path ends with '*', then all the directory entries found below that path will be included.
tagsList of paths categorized as tags. If a path ends with '*', then all the directory entries found below that path will be included.

[ticket]

default_componentDefault component for newly created tickets
default_milestoneDefault milestone for newly created tickets.
default_priorityDefault priority for newly created tickets.
default_resolutionDefault resolution for resolving (closing) tickets (since 0.11).
default_typeDefault type for newly created tickets (since 0.9).
default_versionDefault version for newly created tickets.
max_description_sizeDon't accept tickets with a too big description. (since 0.11).
preserve_newlinesWhether Wiki formatter should respect the new lines present in the Wiki text. If set to 'default', this is equivalent to 'yes' for new environments but keeps the old behavior for upgraded environments (i.e. 'no'). (since 0.11).
restrict_ownerMake the owner field of tickets use a drop-down menu. See Assign-to as Drop-Down List (since 0.9).
workflowOrdered list of workflow controllers to use for ticket actions (since 0.11).

[timeline]

abbreviated_messagesWhether wiki-formatted event messages should be truncated or not. This only affects the default rendering, and can be overriden by specific event providers, see their own documentation. (Since 0.11)
changeset_collapse_eventsWhether consecutive changesets from the same author having exactly the same message should be presented as one event. That event will link to the range of changesets in the log view. (since 0.11)
changeset_long_messagesWhether wiki-formatted changeset messages should be multiline or not. If this option is not specified or is false and wiki_format_messages is set to true, changeset messages will be single line only, losing some formatting (bullet points, etc).
changeset_show_filesNumber of files to show (-1 for unlimited, 0 to disable). This can also be location, for showing the common prefix for the changed files. (since 0.11).
default_daysbackDefault number of days displayed in the Timeline, in days. (since 0.9.)
newticket_formatterWhich formatter flavor (e.g. 'default' or 'oneliner') should be used when presenting the description for new tickets. If 'oneliner', the [timeline] abbreviated_messages option applies. (since 0.11).
ticket_show_detailsEnable the display of all ticket changes in the timeline (since 0.9).

[trac]

authz_filePath to Subversion authorization (authz) file
authz_module_nameThe module prefix used in the authz_file.
auto_reloadAutomatically reload template files after modification.
base_urlReference URL for the Trac deployment. This is the base URL that will be used when producing documents that will be used outside of the web browsing context, like for example when inserting URLs pointing to Trac resources in notification e-mails.
check_auth_ipWhether the IP address of the user should be checked for authentication (since 0.9).
databaseDatabase connection string for this project
default_charsetCharset to be used when in doubt.
default_handlerName of the component that handles requests to the base URL. Options include TimelineModule, RoadmapModule, BrowserModule, QueryModule, ReportModule and TicketModule (since 0.9).
default_timezoneThe default timezone to use
htdocs_locationBase URL of the core static resources.
ignore_auth_caseWhether case should be ignored for login names (since 0.9).
mainnavList of item IDs to display in the navigation bar mainnav.
metanavList of items IDs to display in the navigation bar metanav.
permission_policiesList of components implementing IPermissionPolicy, in the order in which they will be applied. These components manage fine-grained access control to Trac resources. Defaults to the DefaultPermissionPolicy? (pre-0.11 behavior) and LegacyAttachmentPolicy? (map ATTACHMENT_* permissions to realm specific ones)
permission_storeName of the component implementing IPermissionStore, which is used for managing user and group permissions.
repository_dirPath to local repository. This can also be a relative path (since 0.11).
repository_typeRepository connector type. (since 0.10)
request_filtersOrdered list of filters to apply to all requests (since 0.10).
show_email_addressesShow email addresses instead of usernames. If false, we obfuscate email addresses (since 0.11).
timeoutTimeout value for database connection, in seconds. Use '0' to specify no timeout. (Since 0.11)
use_base_url_for_redirectOptionally use [trac] base_url for redirects. In some configurations, usually involving running Trac behind a HTTP proxy, Trac can't automatically reconstruct the URL that is used to access it. You may need to use this option to force Trac to use the base_url setting also for redirects. This introduces the obvious limitation that this environment will only be usable when accessible from that URL, as redirects are frequently used.

[wiki]

ignore_missing_pagesEnable/disable highlighting CamelCase links to missing pages (since 0.9).
render_unsafe_contentEnable/disable the use of unsafe HTML tags such as <script> or <embed> with the HTML WikiProcessor (since 0.10.4). For public sites where anonymous users can edit the wiki it is recommended to leave this option disabled (which is the default).
split_page_namesEnable/disable splitting the WikiPageNames with space characters (since 0.10).
}}} == [components] == #components-section This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to `enabled` or `on` will enable the component, any other value (typically `disabled` or `off`) will disable the component. The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module. Consider the following configuration snippet: {{{ [components] trac.ticket.report.ReportModule = disabled webadmin.* = enabled }}} The first option tells Trac to disable the [wiki:TracReports report module]. The second option instructs Trac to enable all components in the `webadmin` package. Note that the trailing wildcard is required for module/package matching. See the ''Plugins'' page on ''About Trac'' to get the list of active components (requires `CONFIG_VIEW` [wiki:TracPermissions permissions].) See also: TracPlugins == [ticket-custom] == #ticket-custom-section In this section, you can define additional fields for tickets. See TracTicketsCustomFields for more details. == [ticket-workflow] == #ticket-workflow-section ''(since 0.11)'' The workflow for tickets is controlled by plugins. By default, there's only a `ConfigurableTicketWorkflow` component in charge. That component allows the workflow to be configured via this section in the trac.ini file. See TracWorkflow for more details. == [milestone-groups] == #milestone-groups-section ''(since 0.11)'' As the workflow for tickets is now configurable, there can be many ticket states, and simply displaying closed tickets vs. all the others is maybe not appropriate in all cases. This section enables one to easily create ''groups'' of states that will be shown in different colors in the milestone progress bar. Example configuration (which is also the default): {{{ closed = closed closed.order = 0 # sequence number in the progress bar closed.query_args = group=resolution # optional extra param for the query closed.overall_completion = true # count for overall completion active = * # one catch-all group is allowed active.order = 1 active.css_class = open # CSS class for this interval }}} The definition consists in a comma-separated list of accepted status. Also, '*' means any status and could be used to associate all remaining states to one catch-all group. The CSS class can be one of: new (yellow), open (no color) or closed (green). New styles can easily be added using the following selector: `table.progress td.` == [svn:externals] == #svn:externals-section ''(since 0.11)'' The TracBrowser for Subversion can interpret the `svn:externals` property of folders out of the box. However, if those externals are ''not'' using the `http:` protocol, or if a link to a different repository browser (such another Trac or [http://www.viewvc.org/ ViewVC]) is desired, then Trac needs to be able to map an external prefix to this other URL. This mapping is done in the `[svn:externals]` section of the TracIni Example: {{{ [svn:externals] http://theirserver.org/svn/eng-soft http://ourserver/viewvc/svn/$path/?pathrev=25914 svn://anotherserver.com/tools_repository http://ourserver/trac/support/browser/$path?rev=$rev }}} With the above, the `svn://anotherserver.com/tools_repository/tags/1.1/tools` external will be mapped to `http://ourserver/trac/support/browser/tags/1.1/tools?rev=` (and `rev` will be set to the appropriate revision number if the external additionally specifies a revision, see the [http://svnbook.red-bean.com/en/1.4/svn.advanced.externals.html SVN Book on externals] for more details). ''FIXME'': while the above example works, this syntax is not OK, see #6784 == Discussion == ''Please discuss documentation change here. Even better, send us documentation patches against the code, either on Trac-dev or on new tickets.'' - `[attachment] max_size`: ... size ''(in bytes)'' ... ---- See also: TracGuide, TracAdmin, TracEnvironment