|Version 78 (modified by 4 months ago) ( diff ),|
MySQL and its MySQLdb Python bindings
The recommended versions of MySQL are those from 5.x series and above.
The following MySQL drop-in replacements are also known to work:
- The MariaDB variant:
- tested MariaDB 5.3.3, MySQLdb 1.2.3 and Trac 0.12.3
- tested MariaDB 10.1.10 (x64), MySQLdb 1.2.5 and Trac 1.0.10dev, 1.2dev
- The Percona variant:
- tested Percona 5.6 with Trac 1.1.4
To avoid Unicode and international character conflicts in Trac, such as international characters turning into question marks with mysterious "Incorrect string value" errors logged, the Trac database must be configured with one of the following character set and collation type pairs:
The configuration is specified through the
collation_database variables of
my.cnf. Additionally, all tables must be of type
Tables must be created as InnoDB or TokuDB type tables, because Trac uses a transaction mechanism that is not supported by MyISAM tables, see ticket:8067:5 and MySQL docs. Be aware that the cluster storage engine NDB introduces some limits for Trac (#8567).
default_tmp_storage_engine variables in
my.cnf must be set to one of the storage engines supported by Trac.
A proper database can be created with any MySQL client, like this:
CREATE DATABASE trac DEFAULT CHARACTER SET utf8 COLLATE utf8_bin;
With MySQL version 5.5.3 and up, you can also select the mb4 variant of utf8, which enables you to store any Unicode character, not only those in the Basic Multilingual Plane. Note that you'll need at least Trac 0.12.3 for this (#9766).
CREATE DATABASE trac DEFAULT CHARACTER SET utf8mb4 COLLATE utf8mb4_bin;
To check the character set settings for your database, issue the following commands:
mysql> USE trac; Database changed mysql> SHOW VARIABLES WHERE variable_name IN ('character_set_database', 'collation_database'); +------------------------+----------+ | Variable_name | Value | +------------------------+----------+ | character_set_database | utf8 | | collation_database | utf8_bin | +------------------------+----------+ 2 rows in set (0.01 sec) mysql>
If you have for example
utf8_ci collation, then read on to the #Conversion section below on how to change it.
If you are setting a new collation on an existing database, make sure that column collations are converted too:
mysql> SHOW FULL COLUMNS FROM `node_change`; +-------------+-------------+-----------+- | Field | Type | Collation | +-------------+-------------+-----------+- | rev | varchar(64) | utf8_bin | | path | text | utf8_bin | | node_type | varchar(32) | utf8_bin | | change_type | varchar(32) | utf8_bin | | base_path | text | utf8_bin | | base_rev | varchar(64) | utf8_bin | +-------------+-------------+-----------+- 6 rows in set (0.00 sec)
See #3884 for info about collations.
Usually, you also want to create a user and give this user access to the database created above:
GRANT ALL ON trac.* TO tracuser@localhost IDENTIFIED BY 'password';
The connection string will then be:
Trac ≥ 1.3.2
For Trac ≥ 1.3.2, PyMySQL should be used.
Trac < 1.3.2
The recommended version is MySQL-python 1.2.2+, which must be compiled in thread-safe client mode. Earlier versions are known to be problematic.
The MySQL-python page on PyPI contains links to the
.tar.gz source distribution.
For Windows, there are several possibilities:
- the PyPI page mentioned above also links to pre-built Windows eggs, but for Python 2.7 32-bits only.
- Python binaries (32-bits and 64-bits) can be found at codegood.com for Python 2.6 and for Python 2.7; these have been last updated in 2010, so it only proposes version 1.2.3, which should however work fine.
- Python 2.7 wheels (32-bits and 64-bits) can be found in the Unofficial Windows Binaries for Python Extension Packages, kindly provided by Christoph Gohlke, Laboratory for Fluorescence Dynamics, University of California, Irvine.
- if you are using ActiveState Python 2.6 on Windows, you can install with
pypm install mysql-python
- the Conda project also contains recent versions of this package and it's handy for use by continuous integration systems as the package can be installed non-interactively using the command
conda install -qy mysql-python(32-bits and 64-bits).
On FreeBSD this package is called
py-MySQLdb in the ports collection.
Thread-safety is important
You should make sure that you are using a thread-safe version of the bindings.
To verify this, you can check the System Information section in the About Trac page, when you are logged with a user having the
CONFIG_VIEW or the
You should see a line reading: MySQL
server: "...", client: "...", thread-safe: 1.
If you're seeing
thread-safe: 0 instead, the MySQL-python version you're using was not correctly built. Check the following resources to see what you should do:
- MySQLdb-1.2.3/MySQLdb/README, see the Building and installing section,
Note that even if you build MySQLdb to use the thread-safe libraries, About Trac may still report that it is not thread-safe. If that happens, verify that it is thread-safe by calling
MySQLdb.thread_safe() from a standalone Python script, ie not under Apache. If the stand-alone test reports that MySQLdb is indeed thread-safe, then the problem may lie with the PHP module. For example, the Red Hat rpm for PHP is built to use the non-thread-safe MySQL libraries, and the Apache PHP module apparently gets loaded first. So when Python and MySQLdb load, they end up using the already loaded MySQL libraries, which are not thread-safe. The circumvention for this problem is to replace the non-thread-safe libs in
/usr/lib/mysql with soft links, so as to have the non-thread-safe lib names point to the thread-safe libs; restart Apache, and now Trac should be running in thread-safe mode.
Convert from MyISAM to InnoDB storage engine
InnoDB is the default storage engine for since MySQL v5.5, but older databases may still use MyISAM. Check which tables use an unsupported storage engine:
SELECT table_name, engine FROM information_schema.tables WHERE table_schema = DATABASE();
For every table in the Trac database which is not InnoDB run the following:
ALTER TABLE `table_name` ENGINE = InnoDB;
Convert to "utf8_bin" collation
First modify the DB collation to ensure new tables will be created properly:
ALTER DATABASE `trac_database` DEFAULT CHARACTER SET utf8 COLLATE utf8_bin;
Then modify the collation for tables. The command below changes the default collation for new columns and converts old columns as well. Run the following for every table:
ALTER TABLE `table_name` CONVERT TO CHARACTER SET utf8 COLLATE utf8_bin;
next-dev-1.7.x milestone tickets:
- Add [trac] mysql_storage_engine option instead of editting my.cnf
next-major-releases milestone tickets:
- MySQL schema changes for performance
- Reduce join in query process
- Attachment table primary key not unique when migrating from SQLite to MySQL
next-stable-1.4.x milestone tickets:
- Add a script to contrib for converting MySQL storage engine
- Support ucs2/utf16/utf32 charset and utf16_bin/utf32_bin collation in MySQL
unscheduled milestone tickets:
If you have an issue, such as
OperationalError: (2006, 'MySQL server has gone away'), as in #3645, and your web frontend is Apache, you may have conflicting MySQL libraries. Read ApplicationIssues#MySQL_Shared_Library_Conflicts. Another possibility is that you've hit MySQL bug 36639, as explained in ticket:3645#comment:48.
Changing collation to utf8 may fail in MySQL 5.0.x on the MyISAM table type and display the "too big" indexes in some Trac tables. Upgrade to a higher version of MySQL and use InnoDB tables, see ticket:3659:5.
- Error when adding or viewing a ticket using MySQL
- Problems with database encoding
- Encoding problem with mysql
- initenv problem with MySQL - Access Denied
- install error (mysql)
- TypeError: unhashable type when installing trac-0.10.3 with mysql
- 'module' object has no attribute 'connect'
- InterfaceError: (0, '') after idle period with mod_wsgi 1.1/Apache 2.2.3
- trac-admin allows to init environment with mysql errors
- Trac 0.10.4 - ticket module provider fails in background
- IntegrityError when not logged in
- Formatted time via SQL command FROM_UNIXTIME fails to replace %*
- OperationalError: (2002, "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (13)")
- TypeError: int() argument must be a string or a number
- TypeError: unsupported type for timedelta microseconds component: unicode
- OperationalError: (1030, 'Got error 28 from storage engine')
- Problem with synchronizing svn commits to MySQL database
- The $ character must be URL encoded if used as a database password
- MySQL structure case insensitive causes collision with file names
If you get an error from Python when using
trac-admin like this:
OperationalError: (1045, "Access denied for user 'tracuser'@'localhost' (using password: YES)")
There are a few possibilities:
- Try first to login on the command-line using the user
mysql -p -h localhost -u tracuser
- Created user is not yet used by MySQL. Login to the MySQL server as root with
mysql -pand type:
- The user is added but the host does not match in the MySQL user table (occurred on a FreeBSD setup). Correct this with:
mysql -p; use mysql; UPDATE user SET Host="localhost" WHERE User="tracuser"; FLUSH PRIVILEGES;
Ticket numbers are not incrementing by one
The database schema specifies autoincrement for several columns, including the column for ticket IDs. In MySQL, the autoincrement value is configurable and defaults to
1. If the sequence of ticket IDs is not incrementing by 1, the auto_increment_increment value in
my.cnf probably needs to be changed to